ASCE Region 7 Spring/Summer 2009 Continuing Education Seminars

 

In our continuing effort to enhance communications between ASCE’s Sections, Branches and ASCE National, Geographic Services is pleased to advise you of the following seminars scheduled in your geographic area from April  through September 2009:

April 16-17, 2009                 Denver, Co

Wind Loads for Buildings & Other Structures (Structural)

 

April 27-28, 2009                 St. Louis, MO

Pipe Selection for Municipal Facilities (Hydraulics and Water Resources)

 

May 7-8, 2009                       Rapid City, SD

Structural Design of Residential Bldgs Using the 2006 International

  Residential Code (Structural)

 

May 18-19, 2009                  Denver, CO

Construction Cost Estimating for the Civil Engineers (Construction)

 

June 11-12, 2009                St. Louis, MO

Advanced Detention Routing: Improving the Operation and Effectiveness of

 Detention Facilities (Hydraulics)

 

June 25-26, 2009                St. Louis, MO

Structural Condition Assessment of Existing Structures (Structural)

 

July 8-10, 2009                    Rapid City, SD

Streambank Stabilization for Restoration and Flood Control (Hydraulics)

 

July 8-10, 2009                    Denver, CO

Structural Vibration Analysis, Design and Troubleshooting (Structural)

 

July 15-17, 2009                  Denver, CO

Structural Desingn of Buildings and Industrial Facilities for Blast Loads

  and Accidental Chemical Explosions (Structural)

 

August 26-28, 2009            Denver, CO

HEC-RAS Computer Workshop for Unsteady Flow Applications (Hydraulics)

 

September 10-11, 2009     Denver, CO

Design and Strengthening of Shallow Foundations for Conventional and

  Pre-Engineered Bldgs (Structural)

 

September 10-11, 2009     St. Louis, MO

HEC-HMS Computer Workshop (Hydraulics)

 

September 10-11, 2009     Denver, CO

Project Management (Management)

 

September 16-18, 2009     Denver, CO

Introduction to Tunnel Design and Construction (Geotechnical)

These in-depth, practice-oriented programs are produced by ASCE’s Continuing Educations Department and may be of interest to many ASCE members in your Sections and Branches.  We would greatly appreciate if you would consider positing information on these seminars in your newsletters and on your websites.

Detailed descriptions of the seminars (by title) are available on ASCE’s website at www.asce.org/conted/seminars.

If you have questions or need assistance, please contact Kelly Jarvis, Continuing Education Registrar at kjarvis@asce.org, or me at mcook@asce.org.